Wood Powder Mill All the bearings are water-cooled Suitable for: miscellaneous wood powder
It is a new type of superfine wood flour machine production line equipment with good crushing effect, high output and product fineness that can be adjusted at will.
Roller grinding wood powder machine, centrifugal grinding and impact crushing, shearing, impact crushing, extrusion pieces as a whole, using fluid mechanics principle, can be made of wood, fiber, non-metallic mineral material grinding mill below 350 mesh, with good performance, high efficiency, low wear and tear, cover an area of an area small, easy to install, easy to operate, etc., product granularity index is good, stable performance.This machine is widely used for ultra-fine crushing of non-combustible and explosive materials with mohs hardness below 6.
After rough crushing, the material is transported to the grinding chamber of the main machine by the feeding device. The material and the high-speed rotating device and particles collide, collide, shear and squeeze each other to realize ultra-fine grinding. The crushed materials are transported to the impeller classification area by the rising air flow. Under the action of the centrifugal force of the grading wheel and the suction force of the fan, the coarse and fine particles are separated. The qualified fine powder is collected by the cyclone collector, and the unqualified materials are returned by the internal classifier. The crushing cavity is crushed again.
| Model NO. | 550 | 850 | 950 | 1000 |
| (water-cooling double chamber) |
| Power (kw) | 11-18.5 | 22-30 | 45-55 | 90-110 |
| Rotate speed (r/min) | 3600 | 3300 | 2900 | 2900 |
| Number of cutter | 36 | 72 | 96 | 192 |
| Degree of fineness (mesh) | 10-500 | 10-500 | 10-500 | 10-500 |
| Feeding particle size(mm) | <30-35mm | <30-40mm | <40-50mm | <50-60mm |
| Material Moisture | <6% | <6% | <6% | <6% |
| Weight(kg) | 1600 | 2600 | 3800 | 9200 |
| Dimension(m) | 4.5×1.8×3.5 | 7×2.5×4.3 | 7×2.8×4.3 | 12*3.5*5.5 |
Range of application
Wood flour machine is suitable for: wood powder, wood chaff, bamboo powder, chestnut, elm wood powder, wood grain, wood, leather grain, wood powder, cedar wood powder, dried small shrimps, anise powder, Chinese prickly ash, chili powder, pepper, refined cotton, feather, feather stalk, straw, wheat bran,
Is bakelwood, plastic, paper, Chinese herbal medicine, breeding and other industries indispensable wood crushing equipment.
The main features:
1. Tap water can be injected to cool the water.All the bearings are water-cooled to protect the bearings.
2. With fineness analyzer, the material fineness can be controlled at will.
matters needing attention
1. Before starting, it shall strictly check whether the installation of all parts of the machine meets the requirements. Do not drop metal objects into the machine.
2. Startup sequence: start the fan first, then start the host machine, and stop the host machine and then stop the fan when the machine stops.
3, feeding should be uniform, feeding particle size according to the hardness of the material, the diameter of hard material shall not exceed three centimeters, strictly prohibit metal hard into the feeding mouth.
4. In the process of use, the motor load should not be overloaded and keep normal operation.
5. Always check the wear procedure of the blade and grinding plate. If the blade is seriously worn, replace it in time.
Noted: flammable and explosive materials prohibited to crushing!
Product Tags:
|
|
3600r/Min 11kw Wood Powder Mill For Brittle Materials Images
|
